The solution for Technical support

2 sp0320t2a0 - FF900R12IP4

Used for PrimePACK ™ IGBT module of dual channel SCALE - 2 plug and play type of drive, electrical or optical fiber interface, support drives directly in parallel

application
AC Motors Icon
Industrial Icon
Industrial Motors Icon
Motor Control Icon
Solar Icon
Railway Icon
Servo Motor Icon
Wind Icon

Product details

2 sp0320 dedicated to driving PrimePACK ™ IGBT module.As SCALE - 2 plug and play device a member of the family, it is on electrical performance and anti-jamming is optimized in order to meet the requirements of different industrial applications.

Compared with traditional solutions, highly integrated SCALE - 2 chipset components number can be reduced by 80%, thus can significantly improve the reliability, and reduce costs.
2 sp0320 is complete dual channel IGBT drive, a DC/DC power supply, short circuit protection, high active clamp and supply voltage monitoring function.

Users only need to install it to the corresponding IGBT module, the system can immediately began to work, the need for additional development or adapter.It can shorten the design cycle, at the same time, will not affect the efficiency of the whole system.
The driver support multiple drives directly in parallel, even if in rated power higher application, also can achieve a simple design of inverter.Can be specialized to the encapsulation of IGBT module adapter.All drives can choose electrical or optical fiber interface.

The interface options
2 sp0320 drives can choose electric interface and the different types of optical fiber interface.

Electrical interface: 2 sp0320t
DIC20 electrical interface is very simple, convenient and easy to use.
The drive is equipped with the following contacts:

  • Power &gnd terminal
  • 2 x drive signal input terminal
  • 2 x state outputs (fault signal feedback)
  • 1 x pattern choice end (half bridge mode/direct)
  • Set the blocking time 1 x input

All inputs have ESD protection function, schmidt properties for all digital signal input terminal.

Optical fiber interface: 2 sp0320s sp0320v and 2
Drives using optical implementation command signal and state feedback signals of electrical isolation.There are two versions available:

  • 2 sp0320v, equipped with general optical fiber interface
  • 2 sp0320s, equipped with ST fiber interface

If you need detailed information, please refer to the product documentation.

IGBT drive in parallel
With independent drive PrimePACK IGBT module can realize any number of direct parallel.Drive directly in parallel is a kind of new, innovative concept, this makes the IGBT parallel technical threshold is greatly reduced, customer flow all don't need to spend too much time to debug.

Product specification

Product specification
Supported by the module FF900R12IP4
Maximum switching frequency 20.00 kHz
IGBT voltage grade 1200 V
technology SCALE - 2
Output power/channel - is the largest 3.00 W.
The interface type Electrical
Manufacturers of IGBT Infineon
The channel number 2
Gate peak current (maximum) + 20 A,
The product type Board,
The Product Sub - Type PnP Driver
Supported by the module IGBT
Master/peripheral N/A
Support the topology
2 - level Voltage Source
3 - level NP - Clamped - Type 1
3 - level NP - Clamped - Type 2
Multi - Level NP - Clamped
Protection function
Adv Active Clamping
The Over - voltage
Short Circuit
UVLO (Sec - side)
UVLO (Pri - side)
Drive mode
Halfbridge
Direct - Independent
Connection types of IGBT Direct
Logic input voltage 5
The power supply voltage (typical) 15.00 V
Gate turn-on voltage + 15.00 V
The door shut off voltage - 10.40 V
Time - the output rise 7.00 ns
Time - output decline 25.00 ns
Isolation technique Galvanic
Isolation type Reinforced
Gate peak current (minimum) - 20

The related resources